There are two vertical knife racks on the crossbeam, one knife rack (standard on the left) is a sharpening rack, and the other knife rack is a lathe rack

The sharpening rack adopts an electric grinding head, which has a more compact structure

The tool holder can be selected from CK51D series (standard) tool holder or CH51T series (with tool magazine) tool holder

The grinding rack adopts a linear guide structure vertically, which improves the dynamic response during reciprocating grinding. The vertical knife rack can be adjusted at different angles

An angle encoder is installed at the center of the vertical tool holder, and its angle value can be fed back to the operating system panel