The saw blade clamped by the guide angle of the sawing machine guide arm is not straight with the sawing machine worktable.

Solution: Install the saw blade and adjust the bolt of the saw guide angle to make the saw blade straight with the workbench.

The saw blade may wear out.

Solution: If the saw blade has correction value, it can be corrected. If not, replace it with a new saw blade.

The saw blade may be loose, tighten the saw blade.

The feeding speed of the sawing machine is too fast. Adjust the speed control valve to slow down the speed.

The gap between the two guide arms of the sawing machine is too large. Adjust the gap between the guide arms, which is usually 6-10 centimeters larger than the data.

The small bearing of the sawing machine may be damaged when clamped in the guide angle of the sawing machine. Simply replace the small bearing